Sunday, June 26, 2011

Got some

supplies in (epoxy mostly) so it was back to boat building this morning.

Frames A and B glassed.


Frame A (shield shape) will face into the anchor locker. The reverse side will get a lighter fabric because it'll face into the v-berth.


This is the heavy 33 oz/yd Vectorply that caused us difficulty before. This time I really soaked the ply first and gave it some time to setup a bit. Then we hit it with lots of epoxy and let it soak in. It takes a lot longer to thoroughly wet out this heavy stuff. Patience is definitely required when working with this stuff.

We'll see how it goes tomorrow when the peel ply comes off.

No comments:

Post a Comment