Sunday, October 13, 2013

Back to it!

Looks like my second career in the Coast Guard is now over. It was fun while it lasted. So it's back to the boat shed. :-)

This morning's session consisted of some Sandinsanity touching up some of the fairing I did two weeks ago.

Feathering out the edges.


Some touch around and inside the thruster tunnel. When I glassed over the tunnel epoxy pooled on the bottom and that had to come out by hand. The only sanding block I had that would do it is the tear drop shape Dura Block.


Once I got that done I mixed up some fairing compound from a recipe given me by a fellow boat builder on Cruisersforum.com.  Thanks Paul.

I had to cut his recipe to a third to try out. It consists of one 16 oz cup of cabosil, two 16 oz cups of microspheres and 1/2 litre of epoxy. My epoxy is a little stiffer than his so I had to add an extra 100 ml of epoxy to get it to a very nice smooth consistency.


This is the biggest batch of fairing compound I've ever mixed up. I didn't want to go to the full recipe in case it was too much to get on the boat before it started to kick. As it was, at 70 degs in the shed, I still had to work pretty quick.

The only tool I had to spred this goop out were the Bondo squeegees and the large drywall knife. I see now how a much larger fairing compound board would help. I might try to fashion one of those myself this week.


As it was it seemed to work out Ok. I'll hit it with the RO then go over it with the sanding block tomorrow. I think this will (supposed to) sand much easier than the recipe's I've tried so far. If that's true then this is pretty close to the mix I'll use for the rest of the hull.

I got paid a visit by the Project Director today. He's not usually in the shed when I'm working. His food dish must be empty again! *lol*

The Project Manager was lounging in his chair on the front porch all day! Ahhhhhh the retired life of an ole' Tom Cat!

Stay Tuned. More Sandinsanity tomorrow!  :-)




No comments:

Post a Comment